Skip to main content
2-LIGHT

2-LIGHT

LE 2LIGHT LED KIT LED1400-830 LDO WH OP
Article number: 76328040
EAN number: 4053167564201
Refurbishment kit 20W 1400lm 3,000 K
Luminous flux
1400 lm
Control
Dimming DALI
Correlated colour temperature
3000 K
Colour
White
See other variants
Login to view your exclusive prices and stock availability
No account yet? Register and upgrade to access your individual pricing and stock info.
Delivery time on request

Technical Data

Electrical Properties
EEC
C
Luminaire input power
20 W
Rated voltage
220 - 240 V
Driver
Driver 1: 1 x LCA 25W 350-1050mA one4all SR PRE Z
Control
Dimming DALI
Emergency included
No
Lum Data
Yes
Light Distribution
Light Source
LED
Luminous flux
1400 lm
Luminaire efficacy
70 lm/W
Correlated colour temperature
3000 K
Chromaticity tolerance (initial MacAdam)
3
Colour Rendering Index min.
80
Light Distribution
STD - standard
Physical Characteristics
Weight
1.15 kg
Colour
White
Maintenance and Protection
Rated useful life (B10)
L80 50000 h 25 °C
overviewFeatures_indoor
Correlated colour temperature
3000 K
Luminous flux
1400 lm
Luminaire efficacy
70 lm/W
Luminaire input power
20 W
Drawings
Light Distribution
Dimensional sketch

Downloads

2-LIGHT

76328040 LE 2LIGHT LED KIT LED1400-830 LDO WH OP 2LIGHT Refurbishment kit; Colour rendering Ra > 80, colour temperature 3000 K (warm white);Chromaticity tolerance (initial MacAdam): 3; Luminaire luminous flux: 1400 lm in E1 housing; luminous efficacy: 70 lm/W; ; refurbishment kit consisting of LED unit for installation in existing 2LIGHT E1/E2/E3 TC-TEL luminaire; supplied loose for installation in ceiling recess; electrical connection: 2-pole terminal; mains voltage: 220-240V/ 50/60Hz; simple mounting via neodyn magnets; connection and cable routing through existing punched holes in the rear wall of the housing; protection rating: IP20; heat sink powder-coated (white); diffuser opal (95/5); dimensions: 190x188x51mm, weight: 1.15 kg, note: Installation and commissioning requires qualified personnel. For installation, the old TC-TEL lampholder, reflector rear panel and ECG unit must be dismantled. With older (screw-fastened) lampholders, a hole must be made on-site and deburred for cable routing.