TECTON MIREL LED
TECTON MIREL LED3700-830 L1000 LDO WH
Article number: 42185323
EAN number: 9008709914230
pendant luminaire 23.1W 3670lm 3,000 K
Luminous flux
3670 lm
Control
Dimming DALI
Correlated colour temperature
3000 K
Colour
White
Technical Data
Electrical Properties
EEC
B
Luminaire input power
23.1 W
Power factor
0.93
Rated voltage
220 - 240 V
Total harmonic distortion (THD)
9.8 percent
Driver
Driver 1: 2 x LC 40/75-400/230 o4a NF h16 EXC4
Safety Class
SC1
Control
Dimming DALI
Emergency included
No
Lum Data
Yes
Light Distribution
Light Source
LED
Luminous flux
3670 lm
Luminaire efficacy
159 lm/W
Correlated colour temperature
3000 K
Chromaticity tolerance (initial MacAdam)
3
Colour Rendering Index min.
80
Light Distribution
STD - standard
Physical Characteristics
Dimensions
1000x60x85 mm
Mounting type
Suspended
Surface mounted
Length
1000 mm
Width
60 mm
Height
85 mm
Weight
1.61 kg
Colour
White
Impact strength
IK03
Degree of protection
IP20
Maintenance and Protection
Rated useful life (B10)
L85 100000 h 25 °C
Maintenance category CIE 97
D - Enclosed IP2X
Norms and Standards
Certificates














Downloads
TECTON MIREL LED
42185323 TECTON MIREL LED3700-830 L1000 LDO WH
Linear, energy-efficient TECTON MIREL LED continuous row luminaire made of roll-formed sheet steel in polyester lacquer finish, white. , Slave luminaire for DALI control (DALI only) with LED converter. LED service life lasts 100000 h before luminous flux is reduced to 85% of the initial value. Chromaticity tolerance (initial MacAdam): 3. Luminaire efficacy: 159 lm/W. Luminaire luminous flux: 3670 lm. Colour rendering Ra > 80, colour temperature 3000 K. LED continuous row luminaire with 4 highly efficient mid-power LEDs per lens segment. Light is guided via the reflector- the lens combination creates a unique continuous row design with photometric benefits such as very low UGR values with minimum light emission surface. Lens reflector enables UGR <19. All-in-one solution: Batten luminaire, lamp and reflector are combined in a single product. Base support of LED continuous-row luminaire of sheet steel in polyester lacquer finish, white. 100% flexible, tool-free mechanical and electrical installation using CLIX-technology by means of two side-mounted rotary levers on the TECTON trunking. No ultraviolet or infrared radiation. Impact strength: IK03. ambient temperature: -20°C to +30°C. Luminaire wired with halogen-free leads. Dimensions: 1000 x 60 x 85 mm weight: 1.5 kg
